HSV-180AS AC380V High Performance Full-closed Loop Position Control AC Spindle Digital Servo Drive
HSV-180ASAC Seriesspindle motor drive is anew generationoffulldigitalAC servospindle drive.This product features highperformance,compact structure,easy-to-useoperation, andhigh reliability.SeriesHSV-180AS AC spindlemotor driveadopts thelatest technologiessuch as specialmotioncontroldigitalsignalprocessor(DSP),and intelligentpower module(IPM), andachieves theclosed-loopservo controlofspindle motor.It has variousspecifications such as 035, 050,075,100,150,200, 300,450Aanddifferentranges of power options.Users canconfigurevarious types of spindledrive motorandAC spindle motorto formhighreliability andperformance AC spindledrivesystems.
Features
1. Cansupportvarious controlmodes forvarious applications(Positioncontrol/Externalspeedcontrol/Internalspeed)
2. Supportfrom 3.7kWup to51kW power rangewhichcanmeetdifferentmachine requirements.
3. SuitableforCNC machinetools, productionmachines andotherservorelated applications as wellas supporting3rd partyservo motorby supportingvarious encoder types.
4. Easyandflexibleoperation
5. Fulldisplay ofstatus
6. Various interfaces,andflexiblecontrolmethods(Pulse/Analog/Feedback interfaceofencoder/Serial communication/ProgrammableI/O)
7. Spindleorientationfunction
8. C axis function
Specification
| Item | Description |
| Input power | Rated voltage | 150A and below specifications: Three phase AC380V -15%---+10% 50/60Hz 200A and above Specification: - Single phase AC220V control power: -15%---+10% 50/60Hz
- Three phase AC380V control power: -15%---+10% 50/60Hz
|
| Control modes | Position control, External speed control, JOG control, Internal speed control |
| Characteristic | Speed frequency response | 300Hz or higher |
| Speed fluctuation | Lower than 5r/min(load 0%--100%) |
| Speed range | 1r/min---12000r/min |
| Constant power range | 1:10000 |
| Position control | Types of pulse command | 1.Direction+pulse train 2.CCW pulse+CW pulse 3.Two-phase A/B quadrature pulse |
| Form of pulse command | Non-insulated wire drive(about +5V) |
| Frequency of pulse command | ≤500KHz |
| Speed control | Types of pulse command | 1.Direction+pulse train 2.CCW pulse+CW pulse 3.Two-phase A/B quadrature pulse |
| Form of pulse command | Non-insulated wire drive(about +5V) |
| Frequency of pulse command | ≤500KHz |
| Electronic gear ratio | 1≤α/β≤32767 |
| Analog command | DC 0～+10V or DC -10V～+10V |
| Acceleration and deceleration function | 0.1～180seconds |
| Type of spindle motor encoder | TTL composite incremental photoelectric encoder: 1024line,2048line,2500line Sine and cosine incremental encoder:256line Absolute encoder: ENDAT2.1/2.2 Protocol encoder(EQN1325/EQN1313) |
| Servo encoder encoder type | Optical encoder(TTL) Sine and cosine analog signal(1Vpp) |
| Input and output signal | Control input | Run enable Alarm clear Forward and reverse running enable Servo orientation ready Control modes switch Indexing incremental orientation ratio input selection |
| Control output | Servo ready Servo alarm Servo orientation-finished Speed-reached Zero-speed reached |
| Servo function | Servo orientation | Accuracy: ±1 pulse; Position adjustment: Parameter setting |
| Rigid tapping | Tapping deviation:±2% |
| Other function | C-axis control, Thread cutting |
| Communication function | RS232 use Modbus protocol |
| Monitoring function | Speed Flux current Torque current Motor load current Switch-value input status display Switch-value output status display Control mode display |
| Protecting function | Over speed Main power over-voltage and under-voltage Over current Overload Motor over heat Big speed error IPM fault etc. |
Dimension
The following figures show the installation dimensions of HSV-180AD series servo drives.
1.Figure 1 Dimension and size of HSV-180AD-, 035, 050, 075 (without auxiliary devices Unit: mm)
Figure 2 Dimension and size of HSV-180AD 035, 050, 075 (with auxiliary devices Unit: mm)
Figure 3 Dimension and size of HSV-180AD-,100, 150 (without auxiliary devices Unit: mm)
Shipment and Packaging
Product Tags:
|
|
AC380V Servo Spindle Motor / Digital Servo Drive Full Closed Loop Position Control Images
|
